BNDCP - B-22, DEGADUR
- MSDS: BNDCP
- Manufacturer: DEGUSSA CORP
- Product Name: B-22, DEGADUR
- National Stock Number: 6520-00N029217
Product Identification
Product ID:B-22, DEGADUR
MSDS Date:05/09/1989
FSC:6520
NIIN:00N029217
MSDS Number: BNDCP
Responsible Party
RIDGEFIELD PARK, NJ 07660
US
Emergency Phone: 201-818-3706
Info Phone: 201-818-3706
Preparer: PROD SFTY COMPLIANCE COM
Cage: 8C791
Contractor
Telephone: 201-818-3706
Cage: 8C791
Ingredients
METHACRYLIC ACID, METHYL ESTER; (METHYL METHACRYLATE). VP
CAS: 80-62-6
RTECS: OZ5075000
Fraction By Weight: <50%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ACRYLIC ACID, 2-ETHYHEXYL ESTER; (2-ETHYLHEXYL ACRYLATE).
CAS: 103-11-7
RTECS: AT0855000
Fraction By Weight: <20%
Hazards
LD50 LC50 Mixture:SEE INGREDIENT
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FAIRLY LENGTHY EXPOSURE MAY CAUSE SKIN
AND EYE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:RINSE OUT W/OUT DELAY UNDER RUNNING COLD H2O FOR @ LST
15 MIN, W/LID (PALPERBRAL FISSURE) OPENED, SEEK MED ADVICE.
SKIN:WASH AFFECTED SKIN W/SOAP/H2O/IF NEC W/ETHANOL. REMOVE CONTAMD
CLTHG, WASH AFFECTED AREA W/SOPA/H2O. INHAL:ENSURE VICTIM HAS AN
AMPLE SUPPLY OF FRESH AIR & IS KEPT QUIET & WARM. SUMMON PHYS.
INGEST: DRINK 2 GLASSES OF H2O. INDUCE VOMIT BY STICKING FINGER
DOWN (SUPP DATA)
Fire Fighting
Flash Point Method:CC
Flash Point:51.0F,10.6C
Lower Limits:2.1%
Upper Limits:12.5
Extinguishing Media:WATER MIST, CO2, FOAM, DRY POWDER, COVER WITH SAND.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . COOL AFFECTED CONTAINER WITH WATER TO
PREVENT CONTAINER FROM RUPTURING.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR, & FORMS EXPLO
MIX W/AIR.
Accidental Release
Spill Release Procedures:DIKE AND ABSORB SPILL WITH ABSORBENT MATERIAL
(SAND, SAWDUST, VERMICULITE, ETC.) AND COLLECT IN LEAK PROOF
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STOR OVER LONG PERIODS OF TIME ONLY IN
INHIBITED FORM. ADVISABLE TO USE W/IN 6 MTHS. CHECK INHIBITOR LEVEL
AFTER 3 MTHS & ADD MORE IF NEC.
Other Precautions:PROTECT FROM LIGHT & CONTAMINATION. INDOOR STORAGE
SHOULD BE RESTRICTED TO APPROVED AREAS W/OVERHEAD SPRINKLERS.
GROUND ALL CONTAINERS WHEN POURING. PROVIDE ADEQUATE VENTILATION.
AVOID ALL IGNITION SO URCES.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
VAPOR/ ACID GAS CANISTER. NIOSH/MSHA APPROVED SCBA DURING
EMERGENCIES.
Ventilation:MECH(GEN): EXPLOSION PROOF. EXHAUST @ POINT OF OPERATION.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROT CLTHG MADE FROM ANTI-STATIC, NON
MELTING MATL. SFTY SHOWER & EYEBATHS SHOULD BE PROVIDED IN WORK
AREA.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
APPEAR/ODOR: (SWEET ESTER ODOR). CNDNTS (STAB):W/FOREIGN MATL. MATLS TO
AVOID:STRONG SOLVENT ACTION AND CAN SOFTEN PAINT AND RUBBER. FIRST
AID PROC: THROAT. CALL PHYS. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCON PERSON.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE ING 1
Vapor Density:SEE ING 1
Spec Gravity:0.97-1.05
Evaporation Rate & Reference:>1(BUTYL ACETATE=1)
Solubility in Water:SEE ING 1
Appearance and Odor:LOW VISCOUS, HIGHLY TURBID FLUID W/TYPICAL METHYL
METHACRYLATE ODOR (SUPP DATA)
Percent Volatiles by Volume:<50
Stability
Stability Indicator/Materials to Avoid:YES
RADICAL SOURCES SUCH AS PEROXIDES, AZOCOMPOUNDS, AMINES, SULFUR CMPDS,
HEAVY METAL IONS, ALKALIS. MATL HAS (SUPP DATA)
Stability Condition to Avoid:AVOID BUILD UP OF ELECTROSTATIC CHARGE.
AVOID IGNIT SOURCES, ENSURE ADEQ SUPPLY OF FRESH AIR. AVOID CONTAM
(SUPP DATA)
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:EXCESSIVE HEAT, INADVERTANT ADDITION
OF RADICAL SOURCE TYPE CATALYST.
Disposal
Waste Disposal Methods:POLYMERIZATION TO SOLID WITH PEROXIDES & MINERAL
FILLER, OR IF RECYCLING IS IMPRACTICAL, WASTE DISPOSAL IN
ACCORDANCE WITH LOCALLY VALID LEGISLATION AND REGULATIONS (NOTIFY
AUTHORITIES IF REQUIRED TO DO SO). DISPOSE OF I/A/W FED/ST/LOC
REGS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.